Container One Partner|A+ BBB Rated|30 Years in the Container Industry
Pillar Guide

Conex Box in Nashville: A Guide for Tennessee Buyers

Conex box, shipping container, storage container: each term has a backstory.

Get a Free Quote (330) 510-5817

What is a Conex Box?

The word conex (sometimes spelled CONEX) is short for "container express," a term coined by the United States military in the 1950s for a standardized steel shipping container used to move equipment and supplies during the Korean War. The original CONEX boxes were 8.5 feet by 6 feet by 6.8 feet, much smaller than today's intermodal units, but the principle was identical: a stackable, lockable, weatherproof steel box that could move by truck, rail, or ship without unpacking.

By the late 1960s the commercial shipping industry had standardized on 20-foot and 40-foot intermodal containers (the units you see on every cargo ship and rail line today). The military term stayed in use: any large steel storage box can be called a conex, even when the unit is technically an ISO shipping container or a purpose-built storage container.

For practical buying purposes the three terms describe the same thing: a corrugated steel container, 20 or 40 feet long, with cargo doors on one end, built to keep wind and water out.

Conex Box vs Shipping Container vs Storage Container

The vocabulary lines up like this:

  • Conex box. Originally a military-spec container. The term now refers to a steel shipping container used for storage, such as the 20-foot and 40-foot units sold on this site.
  • Shipping container. The technical term for an ISO-standard intermodal container. These are the units that cross oceans on cargo ships. They are built to ISO 1496 specifications, which dictate dimensions, lifting points, and structural strength.
  • Storage container. A general retail and rental term used by ground-storage companies. Often refers to the same intermodal unit, but the phrase also covers purpose-built ground-level containers that have never seen ocean service.

If you are shopping for storage, the same physical unit can be sold as any of the three. What matters is the size, the condition grade, and the delivery logistics.

Standard Conex Box Sizes

There are three standard sizes:

  • 20-foot standard. Length 20 ft, width 8 ft, height 8 ft 6 in. Roughly 1,170 cubic feet of interior space: an interior floor about 19 ft 4 in by 7 ft 9 in with 7 ft 10 in of height.
  • 40-foot standard. Length 40 ft, width 8 ft, height 8 ft 6 in. Roughly 2,350 cubic feet of interior space. Suited to contractors, ranches, and businesses.
  • 40-foot high cube. Length 40 ft, width 8 ft, height 9 ft 6 in. The extra foot of headroom adds about 350 cubic feet of usable space, which matters when you store racked goods or tall equipment.

Specialty sizes (10-foot, 45-foot, refrigerated, double-door, side-opening) exist. Ask about them when you request a quote.

Common Uses by Industry

Uses include:

  • Jobsite storage on home builds and other construction sites. Steel walls, lockable doors, and on-site placement make a conex a substitute for a built shed, a fenced compound, or a temporary office.
  • Tour-gear and studio storage on rural property. Long-cycle uses where the container becomes part of the operation, not a temporary fix.
  • Bridge storage for a household between homes. Project-driven needs where timing, access, and short-term affordability all matter.
  • Farm and acreage equipment storage on rural property. Permanent storage for the things a garage or barn cannot fit.

How to Choose the Right Conex Box

Three questions narrow the decision:

  1. How much space do you need? Photograph what you intend to store and compare it with the interior space of each size. A 40-foot unit has about double the space of a 20-foot unit.
  2. How clean does the interior need to be? If you are storing tools, equipment, or boxed goods, a used wind-and-water-tight unit is fine. If the unit will be converted to an office, a workshop, or a clean-room storage space, a one-trip unit saves the cost of repainting and floor refinishing later.
  3. Will it move? If the container will sit on a single property for the whole life of its use, buying makes sense. For a project that ends in a few months, compare the cost of renting from a rental company with the cost of buying.

How Delivery Works in Tennessee

Container One offers tilt-bed delivery and Customer Assist delivery for conex boxes. With tilt-bed delivery, the trailer tilts back and the container slides onto the ground. With Customer Assist delivery, a chain connects the container to an anchor point you provide on site. The container slides onto the ground as the trailer pulls away. A conex box delivery follows this physical sequence:

  1. Site check. You confirm the access route, the placement spot and the overhead clearance before delivery. A 20-foot delivery needs 110 feet of straight clearance and at least 15 feet of driving clearance, with 22 feet of clearance along the entire unloading path. A 40-foot delivery needs 130 feet of straight clearance.
  2. Surface check. Concrete, asphalt, gravel, hard-packed dirt, and grass all work. Soft, waterlogged, or steeply sloped ground may need preparation.
  3. Final placement. The driver sets the container down on the prepared spot.

Permits and Local Rules

Permit rules depend on the municipality, and some HOAs prohibit container placement entirely. Before ordering, check with your local building or planning department, and verify HOA rules if applicable. Our guide to permits in Tennessee walks through the main scenarios. See: Container permits in Tennessee.

What a Conex Box Costs in Tennessee

Pricing is ZIP-specific. Tell us your ZIP and what you need, and a Container One sales representative will prepare your quote. The written quote lists the delivery and container charges.

Frequently Asked Questions About Conex Boxes

For buying purposes, yes. Conex started as a military term and now refers to steel storage containers, including standard ISO shipping containers.
A 20-foot delivery needs 110 feet of straight, unobstructed space, at least 15 feet of height to drive, at least 22 feet of height along the entire unloading path, and at least 10 feet of width. If your lot is tight, send a photo before you book.
Yes. Modifications include doors, windows, ventilation, electrical, insulation, and interior framing. We sell modified units and can quote custom builds. See modified containers in Tennessee.
Lifespan depends on the grade and on maintenance. Used WWT suits storage on rural acreage and farms. One-trip suits buyers who want a clean interior, such as for vintage gear.
Check with your local building or planning department before ordering. Read our Tennessee permit guide for questions to ask.
Keep Reading

Related Guides for Tennessee Buyers

Ready to Get a Conex Box Delivered in Tennessee?

Tell us your Tennessee ZIP and what you need. You'll get a written quote for your address.